drip irrigation tape three-way-manufacture,factory,supplier from China

The appearance of simple three-way makes the installation of pipe and pipe fittings more convenient and quick in the project. It is made of engineering plastics, corrosion resistant, easy to install and use, and has long service life and economic and practical application.

Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.

Set combination Multiple combinations can meet your various needsAOne-outlet three small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way water separatorThree 50cm3/5PVC capillaries  Three small straight drip arrowsBOne-outlet three small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 four-way water separatorThree 50cm3/5PVC capillariesThree small straight drip arrowsCOne-outlet three big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way&

Set combination  Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries  Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way

The built-in patch drip irrigation tape has the following characteristics:The built-in patch drip irrigation tape has many kinds of drip hole spacing for customers to choose, and can customize drip irrigation tape with different plant spacing for customers, so as to ensure that the drip irrigation tape meets the requirements of customers for all planting spacing.The outer diameter of the product is 16mm, and the wall thickness is divided into three types: 0.2/0.3/0.4mm (normal working pressure is 0.08MPa-0.1MPa, and the flow rate of emitter is 2L/h). It can b

Purpose: the drip irrigation system uses the product when the tape is the main pipe. Branch water source, the main pipeline (soft tape) is connected with drip irrigation tape, so that the water in the main pipeline (soft tape) flows into the drip irrigation tape respectively.Usage: use a puncher (14mm in diameter) to make a hole on the side of the soft water tape, and then rotate the three-way into the soft tape hole, tighten the nut to fix the bypass on the soft water tape, and connect the drip irrigation tape on the other sideParameters:Model:16mmMaterial: PE plastic

Drip irrigation : The inlaid drip irrigation pipe is an integrated drip irrigation pipe with a cylindrical dripper embedded on the inner wall of the pipe. The dripper is assembled on the inner wall of the pipe while producing the pipe, which is easy to install and use.Classification1. According to the water outlet method, it is divided into:Pressure Compensated Drip Irrigation Pipes and Non-Pressure Compensated Drip Irrigation Pipes2. According to the structure can be divided into:In-line drip irrigation pipe and inter-pipe drip irrigation pipeapplicationApplicable conditions:1.

The three-way is pipe fittings and pipe connectors. Also known as pipe three-way or three-way pipe fittings, three-way joint, used in the main pipe to branch pipe.The three-way has three openings, namely one inlet and two outlets; Or a chemical pipe fittings with two inlets and one outlet, there are T-shape and Y-shape with equal diameter orifice or reducing orifice, which are used for the convergence of three same or different pipelines. The main function of three-way is to change the direction of fluid.

Performance characteristics: wider water path, the water flow is in a turbulent state and there are multiple inlets into the labyrinth, which has strong anti-clogging ability; the main pipeline on the ground is a black water delivery tape or pipe array, which is suitable for drip irrigation in greenhouses and fields.Technical parameterPipe diameter [mm)Distance between emitters (mm)Pressure (Mpa)Flow rate (L/H)Length of laying (m)Diameter 20300（adjustable)0.02 -0.082、3、4≤150Diameter 16300（adjustable)0.02 -0.082、3、4≤100Diameter 12300 (adjustable

The drip irrigation belt uses a plastic pipe (drip irrigation pipe lead) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the root of the crop for local irrigation. It is a dripper or drip irrigation belt with a very small outlet orifice, which drips water evenly and slowly into the soil near the roots of the crops.1. The built-in dripper has its own filter window, which has good anti-blocking performance.2. Turbulent flow channel design. Water evenly.3. The dripper and pipeline have strong integrity,4.

It can monitor the total injection amount of fertilizer and the instantaneous injection amount of fertilizer in real timeAdjustable instantaneous fertilizer injection (manual adjustment)Real time monitoring of working voltageReal time monitoring and alarm functions of various faults1. EC, PH (including sensor) Fertilizer concentration detection Water pH detection2. Mobile APP (including one-year service fee +.APP signal conversion)3. The automatic fertilizer mixing tank contains a mixing motor4. Weather station, soil moisture5. Automatic partition can reach 256 channels6.

Product features: soft tape bypass valve has its own valve, which can control and adjust the flow of each drip irrigation tape at will.Precautions for installation: 1. mainly used for connection of main water tape, PE water tape(wall thickness 0.6-1.6mm), etc.2.The fittings of this specification are connected between the soft drip irrigation tapes with inner diameter of 16mm.

Set combination  Multiple combinations can meet your various needsAOne-outlet four big straight drip arrow +current stabilizerOne 2L, 4L, 8L current stabilizerOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries Four big straight drip arrowsBOne-outlet four curved drip arrows + single hook  One 4/7 to 3/5 single hookOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries  Four curved drip arrowsCOne-outlet four curved drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 five-way water sep

Usage: first, use special puncher to punch holes on the side of soft water tape, then rotate the bypass valve of the product into the hole of soft tape, tighten the screw to fix the bypass valve on the soft water tape, and connect the drip irrigation tape on the other side.

At present, the built-in cylindrical drip irrigation pipe is Φ16 type drip irrigation pipe. According to the wall thickness, drip irrigation pipes can be divided into three types: 0.6mm, 0.8mm and 1.0mm. The normal working pressure is 0.08MPa-0.1MPa.

Instructions for use: Mainly used for capillary head end control (the right end of the pull ring is connected to a 16mm drip tape, which is fixed by the pull ring; the left end is connected to the water delivery main pipe, which can be used for PE pipes (wall thickness greater than 1mm), water delivery tape or use with matching rubber bands , Connect with pvc pipe.)Product introduction: The pull-ring bypass switch is a commonly used drip irrigation switch.

Micro spray beltImprove fertilizer efficiency, apply drip irrigation technology, base fertilizer, topdressing concentrated water penetrates slowly in the soil to avoidThe loss of nutrients is conducive to the uniform absorption of nutrients and water by the crops, thereby improving the utilization rate of fertilizer efficiency.Micro spray beltIt can keep the soil loose and small, and the soil gap is moderate, which reduces the acidification and salt of the soil.The degree of chemical conversion creates a good soil environment for the normal growth of crops, and the crop growth is consistent.Mi

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

The pressure compensation drip irrigation pipe is made of high-density PE pipe with improved nanotechnology and built-in pressure compensation emitter. It is suitable for complex terrain and has the characteristics of good uniformity, strong anti-clogging ability and long service life.The commonly used model of pressure compensation drip irrigation pipe is Φ16. The distance between the emitters is 300mm (200), the wall thickness is 0.6mm, 0.8mm and 1.0mm.

The drip irrigation belt snap tee has the following advantages: 　　1. There are internal parts such as locking hoop, stepped ring seal ring, etc. The nuts on both sides can be disassembled for assembly and use, which improves the product reuse rate. And the product design is scientific and reasonable, the pipe fittings have high strength, good sealing performance, and no water leakage. 　　2. The drip irrigation belt positive female snap tee is easy to install and use, easy to disassemble, flexible, easy to recycle, beautiful and practical.

The pull ring straight through is used for the connection between drip irrigation tape and drip irrigation tape. Through the reasonable use of pull ring straight through, some shorter drip irrigation tapes can be reused, saving materials and reducing the project cost.Instructions: when in use, insert the pull ring straight through into the drip irrigation tape, and then use the pull ring to lock the drip irrigation tape. The operation method on the other side is the same.

The pull ring plug of drip irrigation tape is a fitting used with drip irrigation tape. It is used for the end sealing of drip irrigation tape, which plays a role of flow closure.Specification and model: 16mm, PE materialUsage:Cut the end of drip irrigation tape with scissors and insert it between the blue pull ring and black part of the pipe fitting.Pull the blue pull ring outward and clamp the drip irrigation tape tightly.

The product has many types, with the characteristics of quick and convenient connection and disassembly, good sealing performance, high strength and long service life. It is widely used in field micro -spray irrigation project.

Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.